Member Project Pics

To share your project on A-I first log in or create an account and select create from the top menu or Click Here

Aeroponics Unit

Submitted by Geronimo24 on Thu, 07/29/2010 - 17:17
in
Aeroponics Unit

Hydroponic 2 plant PC grow case

Submitted by lanini24 on Tue, 04/06/2010 - 17:41
in
Hydroponic 2 plant PC grow case

Here is my PC grow box, it has four 23 watt 2700k lights on a timer, a two plant grow chamber with pump and airstone, also three 80mm fans to keep it cool. I lined the inside with insulated mylar .A few people are building these and selling them on Ebay. So I thought I would build one for myself. Thanks Craig.

8 plant ebb and flow

Submitted by lanini24 on Sat, 02/20/2010 - 16:29
in
8 plant ebb and flow

Here is my system I made from your plans. Its a little different than per plan, I left the risers to the pots a little long. In case I want to make changes later. I also added a ball valve drain to drain it easier, Also i put in a nutrient level indicator. I plan to put a access on top of lid once I find the right thing to use. I used a 258 gph pump it works well. Thanks for the plans I plan to build other systems in the future. Craig.

8 Plant Ebb and Flow

Submitted by nate1 on Sun, 08/16/2009 - 00:08
in
8 Plant Ebb and Flow
This is a system I just built for a friend, it is the same design as the Ebb and Flow found here except, instead of gluing the plant sites onto the elbows I used 3/4" slip to 1/2" threaded female elbows and the bottom portion of a 1/2" to 3/4" riser cutoff at the hex head. I used a #10 rubber washer between the plant pot and the top of the elbow and one between the bottom of the plant pot and homemade part. Completely leak proof and more stable than if glued and has the added bonus of being able to remove the plant pots.

Syndicate content
© Copyright 2008 alternative-innovation.com